Welcome to Nuvair.com
Pro O2 Analyzer Panel Mount
$300.00
Accurate, stable, and simple to use, the Nuvair Pro O2 panel mount analyzer is preferred by commercial and recreational divers using nitrox and can be used in other industries requiring in-line measurement of oxygen in a mixed gas. The Nuvair Pro O2 panel mount analyzer model easily installs on control panels or other flat surfaces for a flush finish. Four power and two module options available.
SKU
9462
Designed for installation on a control panel or other flat surface, the Nuvair Pro O2 panel mount analyzer measures oxygen levels in breathing gas mixtures. The Pro O2 can be used in various disciplines including diving, welding, inerting, medical, and laboratories. Compatible with nitrox, heliox and trimix. Choose from four power and two module options. All Nuvair Pro O2 units are built and tested in-house, and come ready to use.
WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.
Available Options
Four power options are available for this analyzer: 110/220V wall plug-in, DIN rail, 9-volt battery, and lithium battery. For wall plug-in and DIN rail powered analyzers, two optional modules can be built into your analyzer: FAILSAFE and SMART START.
Adding the FAILSAFE Module to your Nuvair Pro Alarm analyzer will automatically disable integrated power equipment if: (a) Analyzer power is interrupted, or (b) Analyzer goes into alarm. Adding a SMART START Module to your Nuvair Pro Alarm Analyzer will automatically power-up the analyzer in tandem with integrated power equipment, like a compressor.
Choose one of three available power options and two available module upgrades by using the Power & Module Options dropdown menu (above).
Specifications
| Maximum Gas Flow Rate | 0.5–2 L/min (~1 bar) |
|---|---|
| Display Accuracy | ±1% of full scale and constant temperature and pressure (0–1 atm) when calibrated with 100% oxygen |
| Sensor Type | electrochemical |
| Expected Cell Life (Room Air & Temp) | 36 months in air at 25°C/77°F and 50% rh |
| Range | 0–100% oxygen |
| Response Time | Less than 12 seconds |
| Operating Temperature | 32°–104°F (0°–40°C) |
| Storage Temperature | 32°–122°F (0°–50°C) |
| Operating Humidity | 0–99% rn, non-condensing |
| Power | 9-Volt battery, rechargeable lithium battery or wall plug-in |
| Dimensions (L x W x H) |
2 x 4 x 5.5 in (5 x 10.2 x 14 cm) |
| Weight | 11 oz (312 g) |
| Warranty | 0–12 months free replacement 13–18 months 50% off replacement 19–24 months 25% off replacement |
| Replacement Sensor | Sensor Replacement 9505 |
